How To Clean A Commercial Ice Cream Machine

Cleaning your commercial ice cream machine is important to keep it running flawlessly. Businesses that use commercial ice cream machines serve hundreds of customers on a daily basis. This means that the employees should also know some commercial ice cream freezer repair practices. Therefore, we are going to share some tips that will help you clean your commercial ice cream machine with ease.

Completely Empty The Ice Cream Machine

The first step to cleaning your commercial ice cream machine is completely emptying it. You need to make sure that everything is removed from the freezing chamber. If you observe that there is some hardened ice cream inside, you will need to scrub and remove it. Furthermore, you also need to make sure that the water flows through the machine without any problem. Therefore, flush it a few times until the water comes out clear.

While emptying the ice cream machine, don’t use any sharp objects inside the appliance to remove any hardened ice cream. The reason is that you might end up damaging any electrical component leading to expensive repairs or replacement. If you find that the ice cream machine is giving you a tough time in terms of cleaning, you can use some chemicals.

However, carefully read the instructions and recommendations of the manufacturer. You can consult the user’s manual about which type of chemicals you are allowed to use. Using excessive or potentially acidic chemicals can damage the internal components of the appliance.

Take The Ice Cream Machine Apart

The next step is taking the ice cream machine apart. But before you get on with it, make sure that the machine is completely switched off. Check the main power source and turn the switch off. Next, you need to grab some tools and begin opening the machine.

If you have recently used the machine, you will want to give it some time to cool off. Never come near, open, or clean a hot ice machine. However, if the machine has not been used, you can continue with taking it apart.

Then again, you will be needing the instructions manual to disassemble and remove the components necessary for cleaning. Commercial ice machines have dispensing tips and handles that regularly come in contact with fingers and ice cream. These tips and needles need to be disassembled and cleaned as well.

Completely Soak And Scrub The Parts

Once you have finally reached a point where scrubbing needs to be done, you need to grab some clean soft cloths and cleaning agents. Depending on the parts or area you plan to clean, you will have to proceed with caution. You can pour a mixture of hot soapy water into the freezing chamber of your ice machine.

Additionally, newer ice cream machines come with a wash cycle setting. If your machine includes that, you can use the future to allow the machine to clean itself. However, if you observe that the feature is not thoroughly cleaning the machine, you will have to do it manually.

As mentioned earlier, grab a clean cloth, soft scrub brush with a handle, and some soapy water. Use the brush to scrub the components to remove any ice cream remnants. Next, place all the parts inside a tub of hot soapy water to kill the bacteria. Rinse them clean and allow them to dry for a while.


The final step of the process is reassembling the ice cream machine. Use a dry towel and carefully wipe away the water from the components. To reassemble the machine, you need to follow the manufacturer’s recommendations.

Apart from cleaning the needles and other components, it is essential that you include cleaning the condenser coil in your regular maintenance too. With time, the coils will be covered with dirt and dust. As a result, the accumulation might lead to coils heating up, eventually reducing the performance of the machine.

You can wash the coils if they are too dirty but in most cases, you should use a cleaning agent along with a soft cloth to wipe the dirt. At the same time, inspect the fans and other important components to ensure they are not damaged.

Final Word

Concluding, cleaning commercial ice machines is easy if you were to follow the steps mentioned above. However, if you are not aware of the basics, you should consider hiring commercial appliance repair services for cleaning. In addition to the cleaning, a professional will perform a thorough inspection as well. topac

Leave a Reply