Automobile

DIY Car Window Tinting

There are plenty of benefits that come with car window tinting. These benefits include:

  • The window tint blocks up to 90% of harmful UVA and UVB rays
  • The window tints reduce the interior heat by up to 55%
  • Tinting protects the interior of the car from fading
  • Reduces glare
  • Increases privacy
  • Provides additional protection by holding the shattered glass in place in the event of an accident

As you can see, there are plenty of benefits that come with tinting your car. You can hire car tinting experts to help you with the work or you can do it by yourself.

If you have the skills, you should go ahead and tint the car yourself. Is this the first time you are doing it? Here are the steps that you should follow:

Clean the windows

There is no way you are going to apply the tinting material on a dirty window. Use clean water and soap to clean the windows. In addition to cleaning the windows ensuring that the tinting material sticks, it also prevents the tint from being ugly and bumpy.

Car tinting experts recommend that you clean your windows a number of times before you apply the tinting film. This is to ensure that the windows are thoroughly clean.

When cleaning, get rid of any stickers or adhesives that might be on the windows. Removing the stickers ensures that the film sticks on the windows perfectly.

When cleaning, ensure that you get to the tops as well. This calls for you to lower the windows. You shouldn’t use Windex or any cleaner with ammonia in it as it will tint the windows purple.

Once you are done with the cleaning, use a dry rag to wipe away the water that might still be present. Ensure that the rag is clean as you don’t want to introduce more dirt on the windows.

For you to prevent the windows from getting dirty as soon as you clean them, do the work in a garage or any other enclosed area.

Get the right tinting material

There are plenty of car tinting materials on the market that you can go for. The most common ones are: solarking nano ceramic, motor shield pro nano ceramic, LLumar window films, and many others.

Each of the tinting films comes with its pros and cons. It’s up to you to choose the one that is ideal for your application.

After settling at a given material, you need to ensure that the material is of the right size. For you to buy the right size, take the time to measure your car windows.

Cut the tinting film

Your next step after buying the window film is cutting it into the sizes that you measured for every window.

For you to do it you need to lay the sheets of the tint over the window and then cut them. When cutting them, ensure that they are at least two inches longer than you need on each end.

If you feel that there is going to be excess material, don’t worry about it. You can cut off the excess later during installation.

Install the window film

Once everything is in place, you should go ahead and install the window tinting film. Start with spraying the application solution onto the glass and remove the adhesive backing of the film. When removing it, ensure that the sticky part is facing the window.

Avoid placing the entire film on the window as it will cause bubbling. The best place to start installing the film is from the bottom of the window.

Slowly attach the sticky portion of the film and smooth it out while moving upwards. Are there excess edges on the film? Cut them off with a razor.

Smoothen out the film

Although, you might be smoothening out the film when installing it, it might not be smooth enough. For you to smoothen it out use a hand squeegee and smooth out any bubbles or creases that might be there.

For you to have an easy time smoothening it out, auto window tinting Springfield professionals recommend that you use a spray bottle full of hot water to spray it on the glass.

Leave a Reply